Due to Covid-19, our office is only allowing essential staff
No walk ins, all orders must be placed online or through 780-944-4819

Free Shipping Above $100 *some exceptions apply*

0

Your Cart is Empty

July 05, 2019 2 min read

Dispense Valves | Everything you need to know

Dispense valves go on the end of the hose reel and control the oil flow. They may or may not meter it and they come in a wide variety of styles and configurations. Although a swivel is industry standard on each dispense valve, you may want to specify it anyway.

The options are:

Metered or unmetered :Metered dispense valves record the litres used on each dispense job as well as keeping an accumulated total. (Graco’s model numbers SDM5 and SDM15 are electronically metered dispense valves for 5 gpm and 15 gpm flow rates.. Model SDV15 is an unmetered dispense valve).

Electronic or mechanical metering:Mechanical meters have been replaced with electronic meters as the technology becomes available. Generally speaking, electronic meters are more durable, can be calibrated, are easier to use and have less flow restriction. (Graco has both styles available but the vast majority of customers opt for the electronic)

Flexible, rigid or gear lube extensions: The extension is the part that goes into the fill spout of the vehicle. Flexible extensions are usually about 10” long and are the most common style. Rigid extensions allow the valve to be self-supported during a dispense job. Gear lube extensions have a right angle tip that makes it easier to access differential fill ports. A significant benefit to different extensions is for fluid identification. The chance of filling with the wrong fluid is relatively small if the extensions are unique. If the customer doesn’t specify, flexible extensions are the safest choice.

Pre-settable (auto shut off):Preset or countdown meters allow the customer to preset a given amount and the meter shuts off when it counts down to zero. Graco electronic presettable meters are models SDP5 and SDP15.

Standard or high flow:High flow meters have less restriction in higher flow applications. They are used in industrial applications, mine sites and lube trucks.

Identification:Different fluids can be identified by different colored swivel covers. Graco electronic meters allow the customer to show the fluid type on the electronic display to minimize errors.

Non-drip nozzles tips:The nozzle tip on the end of the extension traditionally had to be twisted to close it off to prevent drips. Many meters also have automatic tips that self-close under spring pressure. The traditional twist tips are still available and are preferred for mobile applications like lube trucks.

Anti-freeze:Graco Electronically-metered and Unmetered Dispense Valves can be used for coolant.

Looking for a dispense valve? Get in contact with us today! You can also check out our online store!


GET IN TOUCH WITH US


Fireball Equipment Ltd.
16815 117 Avenue NW 
Edmonton, AB T5M 3V6

Within Canada:
Phone: (780) 944-4818 
Fax: (780) 944-4898 
Email: info@fireball.ca

USA or Outside North America:
Phone: 
+1 (877) 944-4818
Fax: (780) 944-4898 
Email: info@fireball.ca

For Service:

Phone: (780) 944-4814
Email: service@fireball.ca

For repair parts and equipment sales:

Phone: (780) 944-4819 
Email: insidesales@fireball.ca

Location: Calgary 
Phone: (403) 776-0605

Location: Saskatoon
Phone: (306) 717-2125

Location: Regina
Phone: (306)-216-6534

Location: Winnipeg 
Phone: (204) 232-1108

Fireball Support Module

Send us a message



Get In Touch

  • Mon
    Tue
    Wed
    Thu
    Fri