For sites that are refilling vehicles more frequently, our DEF 1200 adds a 1890L (500 gal) polyethylene day tank. The swappable totes drain into the permanent tank, which allows dispensing to continue while totes are being replaced. The total capacity is 3200L (845 gal).
*Hover over beacon to view DEF 1200 features
For dispense nozzles with drip tray, nozzle holders, operator controls and dispensed volume display
With five replaceable, 1 micron cartridges to prevent costly engine damage due to particulates in DEF (AdBlue) fluid
With optional second unit to prevent equipment damage due to frozen DEF
Alerts operators if building temperature drops below 23F (-5C) in order to prevent equipment damage due to freezing DEF
For durable construction and easy transport
To prevent freezing of DEF and provide comfortable environment for maintenance staff
Provide easy access for replacing totes
Prevent fluid contamination and sediment build up in tanks from dusty site air
At connection points and potential spill locations
A single lockable man door and walkway space inside the enclosure is provided to allow easy access to all equipment for easy maintenance and security
Including sump, pump out connection and high level sensor
Provides up to 210 LPM (55 GPM) to provide simultaneous light vehicle and heavy vehicle refilling. Magnetic drive eliminates maintenance and leaks typical to centrifugal pumps with dynamic seals
Included for optional remote dispense station
150 LPM (40 GPM) Heavy Vehicle Dispense, 57 LPM (15 GPM) Light Vehicle Dispense. Includes positive displacement meter, 25ft spring retract hose reel and automatic dispense nozzles. Heavy and light vehicle assemblies available independently, combined or as dual dispensers on opposite sides of module
This entry level package draws fluid from one or two IBC 1000L (264 gal) transportable totes. The totes are placed in the building and connected to the pumping system with couplers. This provides up to 2000L (530 gal) of storage.
As demand for DEF grows, upgrade to a refillable 5000L (1450 gal) bulk tank. Tank Level Monitors notify supplier for replenishment. Overfill Protection and Vent filters are included.
For sites that require large storage volumes, the same base dispensing unit can be connected to a 25,000L (6600 gal) stainless ISO tank. The ISO tank can be refilled or swapped out depending on customer needs. This configuration can include a day tank in the building to allow dispensing while the ISO tank is being replaced.
For high volume users, configure the base unit to draw from an external tank of the customer's choosing. Options include insulated and heated polyethylene, stainless steel or epoxy-lined steel tanks of virtually any capacity or footprint. An additional pump and filtration assembly may be added to allow up to four dispensers to be used simultaneously.
57 LPM (15 GPM) metered dispense 3/4" x 50ft spring rewind hose with automatic nozzle with magnetic miss-fill prevention valve.
100 LPM (26 GPM) metered dispense 1" x 50ft spring rewind hose reel with automatic closed system dispense nozzle.
Light and Heavy vehicle dispensing can be located in a separate, heated building such as lube island.
38 LPM (10 GPM) Insulated and heated cabinet with metered dispense.
For less rugged environments, consider the Commercial DEF module. This module comes turn-key and pre-tested with integrated forklift pockets, containment, heating, internal & external lighting and a complete high-end dispense package.
Connect with a sales representative for Pricing & Specifications
Fireball Equipment Ltd.
16815 117 Avenue NW, Unit #110,
Edmonton, AB T5M 3V6
Phone: (780) 944-4819
Fax: (780) 944-4898
Email: info@fireball.ca
For Parts And Service
Edmonton: (780) 944-4819
Calgary: (403) 776-0605
Saskatoon: (306) 717-2125
Regina: (306) 216-6534
Vancouver: (236) 259-1883
Winnipeg: (204) 500-0797
Mississauga: (437) 253-4400