WolverineÂÂ Hazardous Location C1D1 Pump, 115/230 VAC Motor, Simplex, 1/4 in Plunger, FKM-ETP Seals

• Description
• Specs
• Technical

• For account level pricing or to set up an account please call (780) 944-4819

  No minimum spend required to setup an account.

   

  Protecting well sites and pipelines from corrosion, plugging, and freezing. Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.
  
  
  
  Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.
  
  Our injection pumps are designed for up to two years of operation before simple repairs.
  
  Each pump features an adjustable fluid packing that lasts up to 25 times longer than non-adjustable seals.
  
  Designed to operate in environments from -40 F to 175F (-40C to 79C). They have 316 SST wetted parts, plus they•re sealed against water and dust.
  
  Flow rates up to 430 gpd (1,628 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).
  
  Long-lasting seals can easily be replaced in less than ten minutes, on location.
  
  Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.
  
  HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.
  
  Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system.