Free shipping on online orders over $100 - Some large item exclusions apply

0

Your Cart is Empty

Wolverine¨ Drive Module, 12 VDC, 1/11 HP Motor, Duplex, 1/4, 3/8, 1/2 in Plunger For Side A & 3/16, 5/8, 3/4 For Side B

  • Wolverine chemical injection pumps are designed for injecting chemicals at well sites and pipelines to protect from corrosion, plugging, and freezing.



    Wolverine pumps reduce emissions to the atmosphere and have a greater level of control when used with our injection rate controllers.

    Our injection pumps are designed for years of operation before simple repairs.

    Each pump features an adjustable fluid packing that can last up to 25 times longer than non-adjustable seals.

    Designed to operate in environments from -40¡ F to 175¡F (-40¡C to 79¡C). They have 316 SST wetted parts, plus theyÕre sealed against water and dust.

    Flow rates up to 430 gpd (1,628 lpd) and a pressure rating up to 10,000 psi (686 bar, 68.9 MPa).

    Long-lasting seals can easily be replaced in less than ten minutes, on location.

    Precision stroke adjustment between 1/2 in to 1 in ensures accurate injection rates.

    HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.

    Low friction drivetrain to optimize electrical efficiency, reducing the load on your power system.

    HNBR, FKN, FKM ETP, and FFKM plunger packings and check valve seals can handle some of the most aggressive chemicals.

CONTACT US


Fireball Equipment Ltd.
16815 117 Avenue NW, Unit #110, 
Edmonton, AB T5M 3V6
Phone: (780) 944-4819
Fax: (780) 944-4898
Email: info@fireball.ca

For Parts And Service

Edmonton: (780) 944-4819
Calgary: (403) 776-0605
Saskatoon: (306) 717-2125
Regina: (306) 216-6534
Vancouver: (236) 259-1883
Winnipeg: (204) 500-0797
Mississauga: (437) 253-4400

Fireball Support Module

Send us a message



Get In Touch

  • Mon
    Tue
    Wed
    Thu
    Fri